MCC: Oilfield Chemicals Product Bulletins
Oil Field Chemicals Product Bulletins
Oilfield Product Bulletins
B-20
CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
B-20 is a water soluble corrosion inhibitor for use in water injection systems and high water production wells. It controls corrosion caused by H2S forming bacteria. B-20 will also remove iron sulfide build-up from the production equipment, and in injection systems.
TYPICAL PHYSICAL PROPERTIES
Form: Clear Liquid
Specific Gravity: 0.94
Flashpoint: 90°F
Solubility: Water Soluble
APPLICATION
B-20 corrosion inhibitor is recommended for water injection systems, water disposal systems, and
producing oil wells which have a high water cut.
HANDLING AND STORAGE
CAUTION: Flammable Liquid - Corrosive to Skin
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
CI-30
CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
CI-30 is an oil soluble, water dispersable, organic corrosion inhibitor. CI-30 is an excellent film former and is designed to coat and protect all metal equipment. CI-30 is used in high and low water cut production wells and is formulated to prevent corrosion caused by H2S and CO2 gases.
TYPICAL PHYSICAL PROPERTIES
Form: Dark Amber Liquid
Spec. Gravity: 0.9679
Flashpoint: Approximately 135° F
Solubility: Oil Soluble, Water Dispersable
APPLICATION
CI-30 is most effectively used by continuous injection at 5-50 ppm with adequate by-pass fluid to wash the inhibitor to the bottom. Batch treatment can be done using one gallon of chemical once per week, flushed with two barrels of well fluid. An initial application of 2-3 gallons should be used to
coat the equipment with a film.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
CI-33
CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
CI-33 is an oil soluble highly water dispersable organic corrosion inhibitor. CI-33 is an excellent film former and is designed to coat and protect all metal equipment. CI-33 can be used in high water and low water cut oil production wells. CI-33 prevents corrosion caused by H2S and CO2 gases.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Amber Liquid
Flashpoint: 105° F
Spec. Gravity: 0.976
Solubility: Oil Soluble, Water Dispersable
APPLICATION
CI-33 is most effectively used by continuous injection at 5-50 ppm with adequate bypass fluid to wash the inhibitor to the bottom. Batch treatment can be done using one gallon of chemical once per week, flushed with two barrels of well fluid. An initial application of 2-3 gallons should
be used to coat the equipment with a film.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
CI-54
CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
CI-54 is a water soluble corrosion inhibitor used in a variety of oilfield brines, and is effective in H2S
and CO2 environments. CI-54 is a good film former and controls bacterial growth.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Light Brown Liquid
Flashpoint: 145° F
Spec. Gravity: 0.965
Solubility: Water Soluble
APPLICATION
CI-54 can be best applied using continuous injection but may also be applied by periodic batch treatment. Batch treatment can be done using one gallon of chemical once per week, flushed with two barrels of well fluid. An initial application of 2-3 gallons should be used to coat the
equipment with a film.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
EB-72
DEMULSIFIER
PRODUCT BULLETIN
DESCRIPTION
EB-72 demulsifier is a blend of surface active ingredients in aromatic solvent, recommended for a variety of oilfield emulsions. EB-72 has proven effective in the demulsification of high gas cut, low gravity crude oils.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Brown Liquid
Flashpoint: 95° F
Spec. Gravity: 0.963
Solubility: Oil Soluble
APPLICATION
EB-72 should be applied by continuous injection or periodic batch treatment may prove helpful, but continuous treatment is preferred. For most systems the required amount ranges from 5-200 ppm depending on temperature, mixing, type of emulsion, and type of treatment system.
Contact a MCC representative for the proper treatment rate.
HANDLING AND STORAGE
CAUTION: Flammable Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
PRODUCT BULLETIN
DESCRIPTION
EB-170 demulsifier is a blend of surface active ingredients in aromatic solvent recommended for a variety of oilfield emulsions. EB-170 has proven very useful in the demulsification of crude oils with paraffin and gas cutting.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Brown Liquid
Flashpoint: 50° F
Spec. Gravity: 0.932
Solubility: Oil Soluble
APPLICATION
EB-170 should be applied by continuous injection or periodic batch treatment may prove helpful, but continuous treatment is preferred. For most systems the required amount ranges from 5-200 ppm depending on temperature, mixing, type of emulsion, and type of treatment system.
Contact a MCC representative for the proper treatment rate.
HANDLING AND STORAGE
CAUTION: Flammable Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
PD-92
PARAFFIN DISPERSANT
PRODUCT BULLETIN
DESCRIPTION
PD-92 is an oil soluble, water dispersable paraffin dispersant for use in crude oil to control the deposition of paraffin. This chemical keeps paraffin in a dispersed state within the crude oil, thus keeping production equipment free of paraffin accumulations.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Light Amber Liquid
Flashpoint: 50° F
Spec. Gravity: 0.92
Solubility: Oil Soluble/Water Dispersable
APPLICATION
PD-92 can be batch treated or added continuously, however, continuous injection to keep the system clean is the preferred method. Batch treatments would consist of 1-2 gallons circulated downhole with 2 barrels of produced fluid. Amounts of chemical circulation time vary with
the severity of the problem. Regular treatments are recommended.
HANDLING AND STORAGE
CAUTION: Flammable Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
PS-4
PARAFFIN SOLVENT
PRODUCT BULLETIN
DESCRIPTION
PS-4 is an oil soluble paraffin solvent and contains a blend of organic solvents and surfactants. It is effective in removing paraffin deposits from tubing, flowlines, and equipment, (both downhole and above ground. With adequate circulation PS-4 will remove paraffin from formation
perforations also.
TYPICAL PHYSICAL PROPERTIES
Appearance: Light Amber Liquid
Flashpoint: 63° F
Spec. Gravity: 0.882
Solubility: Oil Soluble
APPLICATION
PS-4 should be batch treated weekly with 1 gallon downhole, circulated with well fluid. For severe paraffin, additional PS-4 should be used. PS-4 may also be put into the flowline to keep it free of paraffin. The optimum circulation time and injection rate should be determined by a MCC
representative. A regular treatment program yields the maximum effectiveness.
HANDLING AND STORAGE
Caution: Flammable Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SCI-3
SCALE/CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SCI-3 is an all purpose scale - corrosion inhibitor for "sweet" and "sour" crude oil. SCI-3 prevents the formation of calcium carbonate and calcium sulfate scale. SCI-3 is oil soluble and has excellent filming capabilities.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Brown Liquid
Flashpoint: 115° F
Spec. Gravity: 0.960
Solubility: Oil Soluble, Water Dispersable
APPLICATION
SCI-3 is most effectively used by continuous injection at 5-50 ppm with adequate bypass fluid to wash the inhibitor to the bottom. Batch treatment can be done using one gallon of chemical once per week, flushed with two barrels of well fluid. An initial application of 2-3 gallons
should be used to coat the equipment with a film.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SCI-30
SCALE/CORROSION INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SCI-30 is a water soluble combination of organic corrosion and scale inhibitors. SCI-30 is designed to protect against calcium carbonate, calcium sulfate, and barium sulfate type scales. SCI-30 should prevent high water cut production wells from corrosion caused by H2S and CO2 gases.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Amber Liquid
Flashpoint: 185° F
Spec. Gravity: 1.14
Solubility: Water Soluble
pH: 4-5
APPLICATION
In injection wells, SCI-30 should be injected at 50-100 ppm. For downhole applications SCI-30 should be injected at 20-50 ppm depending on severity of the problem and water characteristics. When batch treatments are used 1 gallon of chemical should be used per 100 barrels of
produced fluid, circulated downhole with 2 barrels of fluid.
HANDLING AND STORAGE
CAUTION: Corrosive Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SCI-60
SCALE/CORROSION
INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SCI-60 is a water soluble combination of organic corrosion and scale inhibitors. SCI-60 is designed to protect against H2S and CO2 corrosion along with calcium carbonate and calcium sulfate scaling.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Dark Brown Liquid
Flashpoint: 80° F
Spec. Gravity: 1.01 - 1.02
Solubility: Water Soluble
APPLICATION
SCI-60 should be used in wells with relatively high water to oil ratios. Continuous or batch treatment of this product will provide long term protection of production equipment. Continuous downhole injection with adequate by-pass is the preferred method of treatment.
HANDLING AND STORAGE
CAUTION: Flammable Corrosive Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SCI-90
SCALE/CORROSION
INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SCI-90 is a combination oil soluble, water dispersible, liquid organic corrosion inhibitor and a water soluble
scale inhibitor. SCI-90 is effective in sweet crude oils with a moderate water cut.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Brown Liquid
Flashpoint: 85° F
Spec. Gravity: 0.956
Solubility: Oil Soluble, Water Dispersable
APPLICATION
SCI-90 is useful in controlling corrosion caused by carbon dioxide and prevents the formation of calcium carbonate and calcium sulfate scale. SCI-90 is best applied by continuous downhole injection. Batch treatments are effective also, 1 gallon of chemical should be used weekly,
flushed with two barrels of produced fluid.
HANDLING AND STORAGE
CAUTION: Flammable Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SI-50
SCALE INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SI-50 scale inhibitor is a phosphonate type scale inhibitor which is effective for the control of calcium carbonate and calcium sulfate in producing wells, water disposal systems and water injection systems.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Liquid
Flashpoint: Above 200° F
Spec. Gravity: 1.125
Solubility: Water Soluble
pH: 7
APPLICATION
SI-50 scale inhibitor is recommended for the prevention of calcium carbonate and calcium sulfate scale at concentrations of 5-50 ppm depending on the severity of the problem and the water characteristics. SI-50 can be used in either continuous injection or squeeze type applications. Batch treatment can be used in low volume wells but whenever possible continuous injection should be used.
HANDLING AND STORAGE
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
SI-80
SCALE INHIBITOR
PRODUCT BULLETIN
DESCRIPTION
SI-80 scale inhibitor is a low molecular type polymer effective for the control of calcium carbonate, calcium sulfate, and barium sulfate in producing wells, water disposal systems, and water injection systems.
TYPICAL PHYSICAL PROPERTIES
Appearance: Clear Liquid
Flashpoint: Not Applicable
Spec. Gravity: 1.13
Solubility: Water Soluble
pH: 5
APPLICATION
SI-80 scale inhibitor is recommended for the prevention of calcium carbonate and barium sulfate at concentrations of 5-50 ppm depending on the severity of the problem and water characteristics. It is suitable for continuous injection or squeeze type applications. Batch treatment can be used in low volume wells but whenever possible continuous injection should be used.
HANDLING AND STORAGE
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
WT-100
WATER TREATMENT
PRODUCT BULLETIN
DESCRIPTION
WT-100 is a multipurpose additive for use in either "sweet" or "sour" water injection systems. WT-100 will give excellent results in high chloride brines. Incorporated in this product are corrosion inhibitors, scale inhibitors, and tension reducing surfactants, which help keep metal surfaces clean, reduce injection pressure, work as an effective dispersant, and prevent scale development.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Clear Liquid
Flashpoint: 95° F
Spec. Gravity: 0.996
Solubility: Water Soluble
pH: 4
APPLICATION
Continuous treatment by a chemical pump attached to the suction site or the injection pump is the preferred method of treatment. Batch treatment into the water tank can also be used as a method to get these chemicals into the injection system. WT-100 should be used at 25-50 ppm
depending on the severity of the problem and the water characteristics.
HANDLING AND STORAGE
CAUTION: Corrosive Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
WT-191
WATER TREATMENT
PRODUCT BULLETIN
DESCRIPTION
WT-191 is a multipurpose fluid additive for use in water injection systems with a high percentage of the water being fresh or less brine than the produced fluid.
Incorporated in this product are corrosion inhibitors, scale inhibitors and tension reducing surfactants which help keep metal surfaces clean, reduce injection pressure, work as an effective dispersant and prevent scale development.
TYPICAL PHYSICAL PROPERTIES
Appearance:Light Amber Clear Liquid
Flashpoint: Over 200° F
Spec. Gravity: 1.02
Solubility: Water Soluble
pH: 5
APPLICATION
Continuous treatment by a chemical pump attached to the suction site on the injection pump is the preferred method of treatment. Batch treatment into the water tank can also be used as a method to get thses chemicals into the injection system. WT-191 should be used at 25-50 ppm depending on the severity of the problem and the water characteristics.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
WT-242
WATER TREATMENT
PRODUCT BULLETIN
DESCRIPTION
WT-242 is a multipurpose fluid additive for use in high brine water injection systems. Incorporated in this product are corrosion inhibitors, scale inhibitors, and tension reducing surfactants which help keep metal surfaces clean, reduce injection pressure, work as an effective dispersant, and prevent scale development.
TYPICAL PHYSICAL PROPERTIES
Appearance: Light Amber Clear Liquid
Flashpoint: 175° F
Spec. Gravity: 1.00
Solubility: Water Soluble
pH: 4½
APPLICATION
Continuous treatment by a chemical pump attached to the suction site on the injection pump is the preferred method of treatment. Batch treatment into the water tank can also be used as a method to get these chemicals into the injection system. WT-242 should be used at 25-50 ppm depending on the severity of the problem and the water characteristics.
HANDLING AND STORAGE
CAUTION: Combustible Liquid
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
WT-400
WATER TREATMENT
PRODUCT BULLETIN
DESCRIPTION
WT-400 is a multipurpose additive for use in either "sweet" or "sour" water injection systems. WT-400 will give excellent results in high chloride brines. Incorporated in this product are corrosion inhibitors, scale inhibitors, and tension reducing surfactants, which help keep metal surfaces clean, reduce injection pressure, work as an effective dispersant, and prevent scale development.
TYPICAL PHYSICAL PROPERTIES
Appearance: Dark Clear Liquid
Flashpoint: 60° F
Spec. Gravity: 0.992
Solubility: Water Soluble
pH: 4
APPLICATION
Continuous treatment by a chemical pump attached to the suction site or the injection pump is the preferred method of treatment. Batch treatment into the water tank can also be used as a method to get these chemicals into the injection system. WT-400 should be used at 25-50 ppm depending on the severity of the problem and the water characteristics.
HANDLING AND STORAGE
CAUTION: Flammable Liquid - Corrosive to Skin
Safe when used according to directions. This product is a stable material and may be stored for several months. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.
Back to main Index